Characteristic of Xinyu Enameled Copper Wire

Moderator: Downey_Wercan

Posts: 2
Joined: Sat Jan 27, 2018 1:47 am

Characteristic of Xinyu Enameled Copper Wire

Postby enameledaluminumwire » Sat Jan 27, 2018 8:18 am

Bare wire automatic alarm device: the enameling machine from Enameled Copper Wire manufacturer take up (take-up) before the last guide wheel to use non-insulated guide wheel, the relay, ON / OFF switch constitute a short circuit, when the coating (varnish) occurs abnormally naked Copper wire, the copper instant contact with the guide wheel, automatic alarm, due to a paint charter at the same time there will be 20/24/28, each one by one to form a single short circuit, when the alarm, Article times.

Laser automatic feedback controller: laser, feedback controller, monitor - the production specifications, diameter (upper, lower limit), speed, coating back to the number of paint wheel motor speed, set the input feedback controller, Automatically test the laser part of the outer diameter, sent to the monitor display, and the information automatically fed back to the controller, the controller according to the production specifications diameter set value, but also automatically adjust the paint wheel motor speed, control film thickness uniformity.

Dielectric loss meter: The temperature test system measures the loss factor of enameled wire insulation by temperature, and can test all kinds of enameled wire. The curve of the test result is TD-curve, which provides the user with a very precise paint molecular structure, and It is a very reliable method of production control during the heating of the product.

Use of enameled wire Notes on work: Film damage (scratch) Injury: enameled wire surface insulation is a thin film, scratched easily rubbed at high speed winding. Tension: improper tension during winding process will lead to smaller enameled wire conductor diameter, due to the deviation of resistance, the proper tension adjustment must be based on winding type, speed, wire size debugging, in principle, the conductor is not pulled small tension Control range. Winding process Machine start and stop time speed, tension can be properly debugged, can not have the force generated, leading to the first line, the tail of the conductor pull small phenomenon, and in the winding process contact corner parts to maintain a certain degree of smoothness, Generally wear-resistant easy to slip jet magnetic conductor or magnetic eye.

Characteristic: The product can work continuously under 130C and has excellent and electrical properties and is suitable for winding in general motors of class B and F and coils of electrical instrument.

Standard in accordance with : IEC 60317-3


155 Enameled Copper Wire

PRODUCT :Enameled copper wire

STANDARD : IEC 60317-3

DATE :16th,Jan.,2017

TYPE :QZY-2/155

SIZE :2.800mm

Lead time: within 15 days for each 20' container after advanced payment received.

Packing: wooden box or pallets by cartons as your requirements.

MOQ: 1 ton

Delivery port: Shanghai or Ningbo

Get more information to visit enamelled wire manufacturer .

Who is online

Users browsing this forum: Leonidasyday and 2 guests